Gauge Pron Star New Content: Files & Pictures #637

Bart uses a totally unique 5'6 track gauge So, i can see why no us rail car builder would ever want to tackle a contract Legacy also has two volume controls, hold the alt1 key and raise the volume and see if the engine sounds come back. I have recently aquired a jad hiawatha locomotive I know the passenger cars are very difficult to find, so i am going to make up a freight set like that what was offered in 0 gauge The 0 gauge version used 800 series freight cars I am thinking of using 200 series freight cars 500 series might be too small I have no cars to set next to the locomotive except some 10 series cars from older. I need to get as many as six conductors through an 1/8 od tube I ran across a thousand meter spool of very fine wire from wehonest on the bay The diameter dimensions were rather cryptic and not our usual awg numbers I'm guessing that this stuff is smaller than 32. I use christmas light led's with a 1k ohm resistor on my other engines but this set up does not work with the lcrx The led's with work if i add a 18v light Here is another hint for making and taking “scale” dimensions Get yourself an “architectural scale” which is marked in a number of different ratios For instance, there is a 1/4” to a foot scale This is perfect for us o gauge guys As an old school structural draftsman, i have quite a few I needed a few straight sections of o gauge track, so i stopped by to see what he had I have owned and operated about fifteen mth standard gauge locos powered by their version of the lionel bal motor.